Optoma ML300, Руководство по обслуживанию

Страница: 38 / 68

Confidential
4-12
ML300
4-6 Run In Test
- Temperature: 2�°C~35°C
- Circumstance brightness: Normal environment
- Screen size: No concern
- Display mode: ECO mode
-
After repairing each unit, it should be Run-in (refer to the below table).
Symptom Run-in Time
Normal repair 2 hours
NFF 4 hours
Auto shut down � hours
- Get into Burn-In Mode
* Cycle setting is based on the defect symptoms. ie: If it is NFF, the run-in time
is 4 hours. You have to set the LE� on for 60min. and LE� off for 15 min for
2 cycles.
Note: Please make sure that the hot exhaust airflows from projectors can flow
towards the aisle.
Press “Up”->“Home”->“Down”->“Zoom” of remote controller
Choose Burn In Test > enter
Lamp On (Min)
Press right key to adjust the time (�0)
Lamp Off (Min) Press right key to adjust the time (15)
Set Burning cycle Press right key to adjust the cycle
After setting up the time, choose ''Start Burn In Mode'' and press "O" button of remote controller.