Optoma HD86 Скачать руководство пользователя страница 60

Страница: 60 / 93

Delta Elec. Inc.

HD86

Company Confidential Optoma___________________ Delta________________
60

2009/08/18

5-5.

SETUP / Source Lock - High Altitude - Auto Power Off

Press the Menu button to open the OSD menu. Press

to move to the SETUP menu.

Press

to move up and down and select

Function

The function description as below,

Source Lock

When this function is turned off, the projector will search for other signals if the current input

signal is lost.

When this function is turned on, it will search for a specified connection port.

High Altitude

Choose “On” to turn on High Altitude mode.

Operates the fans at full speed continuously to allow for proper high altitude cooling of the

projector.

Auto Power Off

Set the time interval (in minutes) to power off the system if there is no input signal detected.

Reset

Return the adjustments and settings to factory default values.

Содержание HD86






























































































Результаты поиска

Содержание HD86

Отзывы:

Optoma HD86, Руководство по обслуживанию, Страница: 60 / 93

Результаты поиска

Содержание HD86

Отзывы: