Optoma H117ST, Руководство пользователя

Страница: 44 / 74

English 44
USING THE PROJECTOR
Auto Power Off (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Sleep Timer (min.)
Configure the sleep timer.
‡ Sleep Timer (min)e: Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
finished (in minutes).
Notee:
The Sleep Timer is reset every time when the projector is powered off.
‡ Always One: Check to set the sleep timer always on.
Quick Resume
Set the quick resume setting.
‡ One: If the projector is accidentally turned off, this feature allows the projector to be instantly powered
on again, if selected within a period of 100 seconds.
‡ Off: The fan will start cooling the system after 10 seconds when user turns off the projector.
Power Mode (Standby)
Set the power mode setting.
‡
Activee:
Choose “Active” to return to normal standby (LAN on, VGA OUT off).
‡ Ecoe: Choose “Eco.” to save power dissipation further < 0.5W.
Notee:
The fans will still run in active standby if “Signal Power On” is enabled.
LAN (Standby)
Enable/Disable the LAN function when the projector is in standby mode.
VGA Out (Standby)
Enable/Disable the VGA Out function when the projector is in standby mode.
USB Power
Set the USB power settings.
‡ One: The projector is always powered on by a USB power source.
‡ Off: The USB Power function is off.
‡ Autoe: The projector is automatically powered on by a USB power source.