![Optoma EzPro730 Скачать руководство пользователя страница 99](http://html.mh-extra.com/html/optoma/ezpro730/ezpro730_service-manual_1644721099.webp)
S
ERVICE
M
ANUAL
8 - 7
EzPro730 0.7*1 DMD SVGA Micro Portable Projector
1
Press Menu button to enter Image function :
- To select Auto image ON and make sure there is no noise occurring.
1
Press Menu button to enter Projection function :
- Select Front Ceiling function and press Enter button.
Make sure the image is upside-down.
- Select Rear Ceiling function and press Enter button.
Make sure the image is up-down and left-right reversed.
- Select Rear Desktop function and press Enter button.
Make sure the image is left-right reversed.
- Select Front Desktop function and press Enter button.
Make sure the image is normal.
1
Press Zoom In and Zoom Out buttons on the remote controller :
- Make sure the image can be scaled up and down.
1
Dark/ R/ G/ B Pattern :
- Make sure the number of dot defect is compliant with the specification.
1
Blue 180 Pattern :
- Make sure there is no any dark blemish dot.
1
Gray 30 Pattern :
- Make sure there is no any bright blemish dot.
5) Function Test III :
(Please note : this function test only be used when you replace a new lamp.)
1
Full White Pattern :
- Measure the luminance at the center of image. It should be above 550 ANSI
Lumen.
1
Press
¬
(up, up, left) buttons on Optoma logo pattern (no signal) to
enter Service OSD :
- Select Factory set and press Enter button to zero the lamp life.
6) Outward Inspection :
1
Scratch :
- Width
£
0.2mm
- Length
£
2.5mm
All manuals and user guides at all-guides.com