Optoma EP772, Руководство по обслуживанию

Страница: 31 / 75

Rev. 01
Company Confidential Optoma_______________________ Delta____________
31
2007/02/09
Make sure the USB cable is firmly attached between projector
and computer; the power switch is in ON position and projector
is in STAND BY mode.
Press
< Down >, < Up >, < Right >, < Up >
key in sequence on
keypad (DP16/DP18/DP3622 series) or IR remote controller (DP02
series)
。
The power and lamp LED will blink and the Projector Control
mode will be enabled.
The New Hardware Wizard launched at the first time Windows
detects a new USB device attached. Use the recommended
suggestion usually works all the way in the process. (Select “No, not
this time”; Press the Next) (Windows XP-SP2)
(Press the Next)
Windows detected and updating the USB Projector Control driver.