Optoma DLP ZU1700, Руководство пользователя

Страница: 62 / 120

English 62
USING THE PROJECTOR
‡ Active Color Uniformity: Automatically adjust the image color to fit the color of the projection screen.
To maintain the optimum focus-level, the brightness of the original content may be decreased.
±
Calibration:
Perform the calibration process. If the target content is outside the color range of
the projector, the color will not be projected correctly.
± Target Selection: Select the target area for calibration. The default area is the center of the
content. Press Enter to return to the OSD menu after the seletion is completed.
± Reset: Clear the calibration result.
Note:
‡ The Active Image Setup functions are performed via the built-in camera. Please make sure the
camera is not covered or blocked by any objects. The auto adjustment process might take more
than one minute to complete.
‡
The functions in the Active Image Setup menu are available for the projections from 100” to 300”
and imaging range needs to cover the entire projection screen. It is recommended to use the
Optoma Visual Suite software for seamless setups and calibration.
‡
For A11 lens the Active Image Setup functions can be applied only if the lens position is centred
with the screen.
Schedule
Schedule the projector functions to operate automatically at the set time.
Schedule
Date and Time
Schedule Mode On
Special Dates
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
2019/11/06 14:00
2019/11/12 +
Reset Schedule
Select
Enter
Enter Return
Exit
Monday View Today
Monday Power On +
Date and Time
Before setting a schedule, setup the date and time settings. Refer to “Date and Time” on page 64.
Schedule Mode
Enable or disable the schedule function. If the projector is controlled via external devices or software, the
Schedule Mode displays AP Mode, and the projector’s schedule functions are grayed out.
View Today
View the event list scheduled for today.
Note:
After the schedule is set up, make sure to save all the settings.
Monday to Sunday
Set up the schedule for days of a week. On the Schedule menu page, select a day and configure the schedule
settings.