English
54
USING THE PROJECTOR
Geometric Correction
Configure the geometric settings to reshape the image for different projection surfaces.
Warp Control
Configure warp settings. Select between Basic, Advanced, and AP.
Basic:
Configure keystone, pincushion, 4-corner settings.
Advanced:
Set the grid color and grid background, as well as configure warp and blend settings.
AP:
Use the warp and blend software tools to control the projector. When the software warp and blend
control is enabled, the projector’s built in geometry functions are disabled.
Basic Warp
Configure basic warp settings.
Keystone:
Keystone function is used to adjust the images in asymmetric rectangle shape.
±
Horizontal:
Adjust the left and right side of the projected image to make it an even rectangle. It
is used for the images with unequal left and right sides.
±
Vertical:
Adjust the top and bottom side of the projected image to make it an even rectangle. It
is used for the images with unequal top and bottom sides.
Pincushion:
Pincushion function is used to adjust the image with barrel or pincushion distortion.
±
Horizontal:
Correct the projected image with horizontal barrel or pincushion distortion.
±
Vertical:
Correct the projected image with vertical barrel or pincushion distortion.
Содержание DLP ZU1700
Страница 1: ...DLP Projector...
Страница 12: ...English 12 INTRODUCTION Bottom view 1 No Item 1 Security bar...
Страница 120: ...www optoma com...