Optoma DLP ZU1700, Руководство пользователя

Страница: 53 / 120

English 53
USING THE PROJECTOR
Display menu
Learn how to configure the settings to properly project images according to your installation circumstances.
Submenus
‡ Aspect Ratio
‡ Digital Zoom
‡ Image Shift
‡ Geometric Correction
‡ Edge Mask
‡ Freeze Screen
‡ Test Pattern
‡ PIP/PBP
Aspect Ratio
Set the aspect ratio of the projected image. The available options are Auto, 4:3, 16:9, 16:10, LBX, or Native. Select
Auto to display the detected image size.
Digital Zoom
Digitally adjust the size of the projected image.
Note: Image projection on the screen depends on the signal source..
Proportional
Enable the function to have the image’s height and width changed at the same ratio.
Horizontal
Use the
t
and
u
buttons to change the width of the projected image.
Vertical
Use the
p
and
q
buttons to change the height of the projected image.
Horizontal Shift
Use the
t
and
u
buttons to horizontally shift the image.
Vertical Shift
Use the
p
and
q
buttons to vertically shift the image.
Reset
Reset digital zoom settings to factory default values.
Image Shift
Adjust the projected image position.
Note:
Different signal sources have different range of image displacement.
H. Position
Use the
t
and
u
buttons to adjust the projected image position horizontally.
V. Position
Use the
p
and
q
buttons to adjust the projected image position vertically.
Reset
Reset image shift settings to factory default values.