13
MISCELLANEOUS
Multipoint Connections
If you have stored pairing information for multiple devices and more
than one of those devices have Bluetooth enabled at the same time,
your BE Sport3 will enable multipoint connection.
Multipoint connection allows your BE Sport3 to hold connections with
two devices at the same time while playing audio signal from only one of
the two devices.
Multipoint connection works in the following ways:
•
Your BE Sport3 automatically connects with the most recently paired
device (“Primary device”).
•
You must manually connect the second device (“Secondary device”) to
your BE Sport3 via its operating system.
•
The BE Sport3 will prioritize the audio from Primary device.
•
You can control Primary device using the BE Sport3 in line controller.
•
When Primary device is idle, your BE Sport3 can receive audio from
Secondary device.
•
Secondary device must be controlled directly from its operating
system.
•
Simultaneous audio from both devices is disabled.
Restore Factory Settings
When you restore the BE Sport3 to its factory settings, the paired
devices stored will be deleted.
To restore factory settings:
1
Ensure that your BE Sport3 are not connected to any device.
2
Put the BE Sport3 in pairing mode.
3
Press simultaneously the Power/Function, Volume Up, and Volume
Down buttons for 2 seconds until the LED indicator flashes red five times
and you hear five short tones from the BE Sport3.
Because all pairing information is deleted after restoring factory settings,
the BE Sport3 will directly enter pairing mode once powered on.
