48
User Controls
Options | Advanced
Direct Power On
Enable or disable Direct Power On.
On—the projector powers on automatically when AC power is
supplied.
Off— the projector must be powered on as normal.
Signal Power On
Enable or disable Signal Power On.
On—the projector powers on automatically when an active
signal is detected.
Off— disable the power on trigger by active signal is detected.
1. Only available on Standby Mode is Active.
2.
If projector is turned off with keeping input the signal source
(the last image source showing on screen), it will not re-start
unless:
a. Terminate the last image source and input any signal source
again.
b. Unplug and re-plug the projector power again.
3. Signal power on will ignore “source lock” setting.
N
ote
N
ote
Содержание 15000L
Страница 67: ...English 67 Appendices 1 2 3 4...
