The
Feedback
mode is an easy way to let the Mini Audio Lab V3 show where are the
difficult Frequencies that can lead to feedbacks.
The frequence of the loudest signal is shown in the first row of the display. The second
line shows the frequency what should be pulled down on your 1/3 otave Equalizer.
Mini Audio Lab will first search for an average level after activating the “Feedback”-
mode. This level might change after a while what leads to a higher threshold before
the relevant frequency will be indicated. Just start the measurement again if the
threshold is too high for a good result.
The Feedback mode gives the chance, to make a good sound also after after a 3-days
Festival with 30 bands, no sleep and totally tired ears.
You can also connect the Mini Audio Lab V3 to the headphone amp of your monitor
desk as well and you will get the feedback frequencies direct from the desk.
That´s all folks!
Now you know what your Mini Audio Lab V3 can do for you. And as you see, that´s quite a
lot.
Just „play“ with it! The more you use the Mini Audio Lab V3, the more you don´t want to
miss it!
Finally, we want you to know, that you shall always be critical to the Results, shown on the
Display. Only in correct Measurement requirements, you can have rational results!
Mini Audiolab V3 manual
5/6
