Page 7 of 51
OptoFidelity Video Multimeter
– User Manual
3
Frame rate measurement task
The frame rate measurement task determines the playback smoothness of the device
under test (DUT) with a test video. A blinking marker is measured from the display of
device and this marker helps to determine frame intervals and missing frames. The
basic measurement setup is shown in Figure 2.
Figure 2: Example of using Video Multimeter for frame rate measurement
3.1
Overview tab
When the Framerate measurement application is started, it opens with the
Overview
tab shown in Figure 3. On this tab, you can start and stop measurements, have an
overview of the results and save them. The overview tab shows the average frames
per second (FPS) over the whole measurement and the total number of frames.
Figure 3: View of the Framerate application before measurement
