background image

16

PRODUCT WARRANTY

Optoelectronics, Inc. warrants all products and accessories for one (1) year against defects in materi-
als and workmanship to the original purchaser.  Products returned for warranty service will be
repaired or replaced at Optoelectronics’ option.

Specifically excluded are any products returned under this warranty that upon examination, have
been modified, had unauthorized repairs attempted, have suffered damage to the input circuitry from
the application of an excessive input signal, have suffered damage to the charging circuitry or inter-
nal batteries from the application of excessive voltage, or show other evidence of misuse or abuse.
Optoelectronics reserves sole right to make this determination.  

No other warranties are expressed or implied, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose.  Optoelectronics, Inc. is not liable for consequen-
tial damages.  

WARRANTY

Products under warranty must be returned, transportation prepaid, to Optoelectronics’ service center.
All parts replaced and labor performed under warranty are at no charge to the customer.

NON-WARRANTY

Products not under warranty must be returned, transportation prepaid, to Optoelectronics’ service
center.  Factory service will be performed on a time and materials basis at the service rate in effect at
the time of repair.  A repair estimate prior to commencement of service may be requested.  Return
shipping will be added to the service invoice and is to be paid by the customer.

Factory Service

Содержание M1



















Отзывы: