X6R/V3R-FX-INTERCOM
6 / 33
rev. 2.8
•
Cables and Accessories
Only use attachments that are specified by the manufacturer of the device.
Use high quality, properly terminated, cables to connect the device. The device should only be used
with optical fibre cables that are specified for use with the devices optical transceivers and within the
specified power budget of the optical transceivers. When not in use, ensure that the optical
connectors on the device and the optical fibre cables are covered with the provided caps.
Do not place this device on an unstable table, tripod, cart, etc. The device may fall, which can cause
injury and serious damage to the device. Any mounting of the device should follow the
manufacturer’s instructions, and should use mounting accessories recommended by the
manufacturer of the device.
•
Service and repairs
Do not attempt to service the device by yourself.
The device contains no user serviceable parts, components or controls. The operation of an opened
device is not permitted. Such operation can lead to damage of the device’s components due to lack
of air-flow through the device.
The device may not be serviced, altered or modified without authorisation from Optocore or an
Optocore authorised distributor / dealer. Only qualified service personnel may carry out repair and
maintenance work on the device. The warranty of the device will be voided if any unauthorized
maintenance or repair work has been carried out.
Содержание V3R-FX-INTERCOM
Страница 2: ...Page intentionally left blank ...
Страница 8: ...Page intentionally left blank ...
Страница 27: ...X6R V3R FX INTERCOM 27 33 rev 2 8 Pin out DC Input Factory Fitted Option 12V GND Pin 4 1 XLR 4 Pin male ...
Страница 28: ...X6R V3R FX INTERCOM 28 33 rev 2 8 Connection Examples GPI GPO IC444 Module ...