DD8RP
3 / 15
rev. 1.0
Purchaser Information
•
Operating Manual
Please read this manual – if you call for technical support, we’ll assume that you have. Study the
operating manual carefully in order to familiarize yourself with the device and its operation. It contains
numerous information and hints for the proper use of the device.
It cannot be excluded that this operation manual shows typographical mistakes or misprints; it is
however regularly revised.
Modifications, which serve the purpose of technical improvement of the device, may be carried out
without prior notification
.
•
Transport and Shipping
Always ensure the careful handling of the device. If possible transport or shipping should always
occur in special, shock-absorbing transport cases. If these are not available we recommend well-
upholstered packaging such as the coated carton in which the device was delivered.
We strongly advise not to use simple flight-cases without rack-in-rack mounting.
•
Environments
This device can be used in E1, E2, E3, E4, or E5 environments (as listed below) according to the
harmonized European standards EN55103-1 and EN55103-2 “Electromagnetic compatibility –
Product family standard for audio, video and audio-visual and entertainment lighting control apparatus
for professional use”
E1-Residental
E2-Commercial and light industrial
E3-Urban outdoors
E4-Controlled EMC environment e.g. broadcast and TV-studio
E5-Heavy industry
The product is intended for the use in moderate climate.
•
Ventilation
Do not block or cover any ventilation slits. Install the device in accordance to the operating manual.
Leave sufficient ventilation space around the units (at least approx. 200mm
≡
7,87" free space behind
the rear-panel) and care for free air movement near the ventilation-slits on both sides of the device.
Keep the rear of the rack open during operation. Do not set up the device close to equipment
producing a lot of heat, for example power-amplifiers. Leave enough space (minimum ½ RU) to any
heat emitting device. A
DD8RP may be placed on top or beneath other Optocore products, except
DD32, without additional space.
•
Water and Moisture etc.
To prevent fire or shock hazard do not expose device to the effects of direct sunlight, dust, water, or
rain during operation or storage.
•
Cleaning
Only use a dry linen cloth to clean the device. In case of strong soiling moisten the cloth using a little
water and a small amount of household detergent. Never use cleansing agents containing solvents to
clean the device.
•
Operating and Storage Temperature
Operating temperature: 0
°
C …50
°
C
≡
34
°
F … 122
°
F; ensure proper ventilation
Storage temperature: -20
°
C …60
°
C
≡
-4
°
F … 140
°
F