Optocore AutoRouter, Быстрый старт

Страница: 5 / 8

OPTOCORE AUTOROUTER
Quick Start Guide
5 / 8
rev. 1.0
Connection Examples – Optocore Autorouter
EXAMPLE 1
An example below shows a mix of Optocore and Digico devices connected to the central Optocore Autorouter.
Some devices connect directly to the Autorouter SLOTs. If part of the system layout is intended to work in the ring
topology, only the first and the last link of such sub-ring can connect to the single Autorouter SLOT (in this
example SLOT 7) – all devices in this sub-ring will be added to the main ring created by Autorouter. In the
example first 3 Router SLOTs provide connectivity for the remote device/devices. Whenever the external mobile
device is disconnected or moved to a different location, Autorouter will recognize it and automatically close the
loop with all active devices without leaving any open links – keeping the redundancy.
In this particular example remote stagebox is connected to Wall Box #1, which connects to SLOT 3 (ports 5,6).
SLOTs 1 and 2 are open (no active device connected). All fixed devices are connected to SLOT 5 (ports 9,10),
SLOT 6 (ports 11,12) and SLOT 8 (ports 15,16). Additionally a small sub-ring is connected to SLOT 7 (ports
13,14).
Optocore Autorouter will make the following cross-points: 6 -> 9, 10 -> 11, 12 -> 13, 14 -> 15, 16 -> 5.
If stagebox is moved to Wall Box #3, which connects to SLOT 1, the patching in Autorouter will change
automatically to: 2 -> 9, 10 -> 11, 12 -> 13, 14 -> 15, 16 -> 1.