Optocon FOTEMP1, Руководство пользователя

Страница: 22 / 28

USER MANUAL FOTEMP1
22
CONNECTING FOTEMP DEVICE WITH PC VIA USB - RS232 CABLE
The driver for the converter must be properly
installed according to request. Use the included
CD:
1) Insert converter in the USB port
2) Windows 7 and 8 most of converters used
their own drivers
3) For Windows XP on request insert the CD and
select the source „CD“ in the driver manager
4) The driver installation must end with the
message that the installation was successful
and the new hardware is ready to use
5) For control you can look up in Settings /
Control Panel / System / Hardware / Device
Manager / Ports (COM & LPT).
There the converter must be as „USB Serial
Port“, „USB Serial Converter“ etc. registered and
do not equipped with error marker (yellow
question mark).
6) Here you can also read the „COM Number“,
which is necessary for future communication
with the software.
Manual parameter settings for serial interfaces
The serial port parameters must be set manu-
ally if you use some special converter types. In
that case you have to open the Device Manager
under Ports (COM & LPT) for seeing the charac-
teristics of the converter display (double- click
the converter-entry). In the „Port Settings“ must
be set for communication with FOTEMP devices
following values:
Baud rate: 57600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None