21
LTDVE4CH-20 | INSTRUCTIONS MANUAL
the application. Similarly, the turn-off protection can be inhibited on selected outputs if required by
the application.
Setting of the output protection logic can be done using the serial RS485 or Ethernet interfaces.
12.7. Free running oscillator
The free running oscillator is an autonomous asynchronous trigger source with a programmable
period from 1000 ms down to 10 ms in steps of 1 ms (corresponding to a frequency of 1 Hz up to
100 Hz). It can be selected as an input to the input multiplexers.
Common usage of the oscillator is to test the lights during machine assembly and deployment.
13. Wiring diagrams
As discussed in the previous sections, the controller is quite flexible and many configurations can be
achieved. The following wiring diagrams describe some of the most common.
13.1. Wiring example #1: controller triggers camera
Figure 10: example schematic #1
the controller is driven by two input
triggers, powers a total of three lights and triggers a camera.
Figure 10: example schematic #1
