OPTO-EDU A59.2240, Инструкция по эксплуатации, Страница: 19 / 20

WWW.CNOEC.COM.CN OPTO-EDU (BEIJING) CO., LTD. 19
calibration. Then manually adjust the coarse and fine focus knob of microscope to make
sure the video is clear. Make sure the magnification in the software stays in accordance
with microscope magnification, and then select the corresponding
Measurement Unit
for
doing the measurement.
Export the measurement information to
CSV
file
(
*.csv
)
Delete All the Measurement Objects
Setting
Exit from Current Measurement Mode
When the measurement ends, left-click on a single measuring object and the
Object
Location & Properties Control Bar
will show up. The icons on the control bar mean
Move
Left
,
Move Right
,
Move Up
,
Move Down
,
Color Adjustment
and
Delete
.
Note
:
1) When user left-clicks
Display/Hide
button on the
Measurement Toolbar
, the
Measurement Toolbar
will
be fixed. In this case the
Camera Control Panel
will not pop up automatically even if moving mouse cursor to
the left side of the video window. Only when users left click the button on the
Measurement Toolbar
to
exit from the measurement mode will they be able to doing other operations in the
Camera Control Panel
, the
Auto Focus Control Panel
or the
Synthesis Camera Control Toolbar
.
2) When a specific measuring object is selected during the measuring process, the
Object Location &
Attributes Control Bar
will appear for changing the object location and properties of the
selected objects.
3) To ensure accuracy of the measurement, please click the
Conjugate Correction
button to reset the
camera sensor to the standard
C-mount
position before calibration. The measurements can be started after
calibration is completed and the video is focused.
4) In case calibration is completed but camera sensor is not on the C-mount position, The
Conjugate
Correction
should be done to reset sensor to the standard
C-mount
position and the video is focused before
measurement is started.