www.cnoec.com.cn Page 9 of 17 [email protected]
3) Geometry character measuring function, automatically analyzing function such as slightness body, grain body,
line body and so on. The outcome can be kept in data and can be made into chart and so forth.
4-19 Use the white balance
1) The CCD has auto white balance when the white balance switch is on
“
ON
”
.
Please put the switch on “ON” in general. Let the switch be
“
OFF
”
only in
special, for example, observing the red cell, otherwise the color of red cell will be
adjusted into white.
If you want to observe another single color, please let the switch be
“
ON
”
again
when you finish the observation, and put the switch on “OFF” again after auto balance, or the color of the image
will be distortion.(Fig.12)
4-20 Adjust the brightness of the bottom light
1) Turn the adjustable light knob
①
according to the sign marked on
the base, along the clockwise the brightness will be added,
otherwise it will be weakened. (Fig.13)
4-21 Replace the lamps
1) Press the stage on the sunken place then the other side will be lifted. (Fig.14)
2) Take the lamp out of the jack.
3) Put a new lamp into the jack thoroughly.
4) Recover the stage plate. (Fig.15)
Note:
①
Before replacing the lamps, turn off the power first.
②
Avoid violence while the lamp is plugged into the jack.
4-22 Replace the fuse
1) Screw the fuse tube out with a screwdriver and then pull the fuse out of the
tube
①
.
2) Renew the fuse and mount it in an adverse way. (Fig.16)
