3
User Notices
Ⅰ、
Configuration Instruction
1
、
A12.1061 is the basic model and uses NIS45 system;
2
、
A12.1062 is coding model, using NIS60 system, with brightness memory, wear
resistance stage and other configurations.
Ⅱ、
Principle and Application
Principle:
Using the appropriate adjustment combination of two lens sets, the
specimen is magnified and observed. The inverted real image is obtained through
objective, then the image is further magnified by the eyepiece.
Application
: Biological microscope is used by medical and health units, colleges and
universities, research institutes for the observation of microorganism, cell, bacteria,
tissue culture, suspension, sediment, etc.
Ⅲ、
Safety Marks
The Following marks are on the microscope
.
Figure out the meaning of these
symbols and always use the microscope in the safest way.
Ⅳ、
Safety Note
1.
Open the box carefully to avoid the accessories, like lens, being polluted by
fingerprint or sweat strain, dropping to ground and being damaged.
2.
Do keep the microscope out of direct sunlight, high temperature or humidity, dusty
and easy shaking environment. Make sure the stage is flat, horizontal and firm
enough.
3.
When moving the microscope, carefully carry it with the handle and the base.
4.
If the bacterium solution or the water splash to the stage, objective or viewing tube,
pull out the power cord at once, and wipe up the microscope. Otherwise, the
instrument will be damaged.
5.
To keep at least 10cm distance all around between the microscope and other objects
for ventilating and cooling.
6.
Make sure the instrument is earthed, to avoid lighting strike.
7.
For safety, be sure the main switch is in “O” (off) state and cut off the power supply
before replacing the fuse. Check the input voltage: be sure the input voltage which is
signed in the back of the microscope is consistent with the power supply voltage, or it
Symbol
Meaning
Power on
Power off
/
Up Lighting/Down Lighting
F.S :Field Stop, :Expanding F.S. :Narrowing F.S.
Direction of light intensity.When turning to the tip, the intensity
decreases from strong to weak
SLEEP
Dormant State
LOCK
Light intensity is locked
