OPTO 22
• 800-321-6786 • 1-951-695-3000 • www.opto22.com • [email protected]
© 2019-2020 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
OPTO 22
• 800-321-6786 • 1-951-695-3000 • www.opto22.com • [email protected]
© 2019-2020 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 4
Form 2311-201202
groov
EPIC Learning Center Setup
PAGE 1
groov
EPIC Learning Center Setup
Form 2311-201202
INSTALLING CONTROL PROGRAMMING SOFTWARE
If you want to create and run CODESYS applications:
1.
Go to the CODESYS Store website (
) and download the CODESYS Development System, Version 3.5.13.1 or higher.
2.
Install CODESYS Development System, following the instructions on the screen for a typical installation.
3.
Go to the Opto 22 website (
) and enter “CODESYS” in the search box. Select
Opto 22 Library Package for CODESYS
from the list of suggested search terms.
4.
On the Opto 22 Library Package for CODESYS Development System page, click Download and save the file on your computer. The file that you
download ends in
.package
.
5.
Follow the instructions in the
EPIC User’s Guide
(form 2267) to add your
groov
EPIC processor to the CODESYS Development System.
If you want to create and run a PAC Control strategy:
1.
Go to the Opto 22 website (
) and enter “PAC Project Basic” in the search box. Select
from the list of suggested
search terms.
2.
On the PAC Project Basic page, click Download and save the file on your computer. The file that you download ends in
.exe
.
3.
Double-click the *.exe file that you downloaded and follow the instructions on screen for a typical installation.
4.
Follow the instructions in the
(form 1701) to add your
groov
EPIC processor as a control engine to your PAC Control
program.
DOWNLOADING PROJECT FILES
The online training modules will take you through the creation of several projects. If you are interested in reviewing completed project files, you can
download them from the Opto 22 website:
1.
Go to the Opto 22 website (
) and enter “EPIC Learning Center” in the search box. Select
groov
EPIC Learning Center Package
from the list of suggested search terms.
2.
On the
groov
EPIC Learning Center Package page, click Download and save the file on your computer.
3.
Navigate to the folder where you stored the file and uncompress it.
4.
Follow the instructions in the Learning Center Package Installation Technical Note (form 2315) to install these files on to your Learning Center.
As you go through the online training and review the projects, the following table can help you understand how the load panel is mapped to the
modules.
WELCOME!
Before you begin, check that you received all the following items in your package:
The following hardware is mounted on the acrylic stand:
You’ll also need the following:
•
An Ethernet cable.
•
110 to 240 VAC power.
•
A username and password that follows strong security recommendations.
•
A network to connect the Learning Center and a computer or mobile device that can connect to the same network as the Learning Center.
Note:
To preserve the clean look of the acrylic stand, remove any fingerprint stains with a plastic cleaner (for example, Plexus® plastic cleaner), not a
glass cleaner.
How do I get my certificates for Premium Factory Training?
The purchase of a Learning Center includes two certificates to attend
groov
EPIC Premium Factory Training for FREE. If your certificates are not in your package, contact
Opto 22 at [email protected] or 800-321-6786 for instructions on obtaining these certificates.
I/O Mapping
Digital Inputs (GRV-IACDCTTL-24)
Digital Outputs (GRV-ODCI-12)
Analog Input (GRV-IICTD-12)
Ch 0:
Top pushbutton, latching
Ch 0:
Blue LED ring around bottom pushbutton
Ch 0:
ICTD
Ch 1:
Bottom pushbutton, momentary
Ch 1:
Sonalert Alarm
Ch 6:
Light rain status (from DO Ch 3)
Ch 2:
Resistor in ICTD probe
Analog Input (GRV-IV-24)
Ch 8:
Light rain status (from DO Ch 4)
Ch 3:
Light rain
Ch 0:
Potentiometer
Ch 10:
Light rain status (from DO Ch 5)
Ch 4:
Light rain
Ch 12:
Light rain status (from DO Ch 6)
Ch 5:
Light rain
Ch 6:
Light rain
Ch 7:
Backlight, Red
Ch 8:
Backlight, Green
Ch 9:
Backlight, Blue
Ch 10:
Python Output, software driven
Ch 11:
Node-RED output, software driven
•
GRV-EPIC-PR1 (
groov
EPIC processor)
•
Module 0, GRV-IACDCTTL-24
•
Module 2, GRV-IICTD-12
•
GRV-EPIC-PSPT (pass-thru power adapter)
•
Module 1, GRV-ODCI-12
•
Module 3, GRV-IV-24
•
GRV-EPIC-CHS4 (4-module mounting chassis)
•
Load Panel: 1 Multi-color LED strip backlight (red, blue, and green); 2 illuminated pushbuttons; 1 potentiometer; 1 temperature probe connector;
1 Sonalert alarm
groov
EPIC I/O unit mounted on an acrylic stand
ICTD Temperature probe with resistor
12V Power adapter & cord
Two documents:
•
groov
EPIC Learning Center Setup
(this document; form 2311)
• A black envelope with a
GRV-EPIC-PR1 Activation Certificate
Pelican carry case
