#Press Menu and Pause to enter VGA.
#Press to move left and right setup menu.
#Press enter to swap decrease and increase feature.Press to decrease and increase.
#Press enter again to left and right feature or to confirm setup.
#Press Menu to exit VGA setup menu ,for DVR operation.
Ⅵ、
Installation:
-26-
4CH STANDALONE
DVR
Procedure
:
1.Uncover DVR.
2.Remove the block behind DVR.
3.Remove the connector linking to control board.
4.Unfasten two screws as diagram.
5.Mount two copper bolts on the cabinet bottom.
6.Connect motherboard and VGA board with two cables of 20pin IDC.
7.Insert VGA Card.
8.Fasten VGA connector screws.
9.Fasten VGA Card screws.
10.Plug in connector to VGA Card.
11.Connect to VGA monitor.
12.Test if VGA monitor works.
13.Put the DVR cover on the cabinet if ok.
14.Enter menu to get proper setup.
15.Done
P5
Содержание 4CH
Страница 1: ...USER MANUAL 4CH STANDALONE DVR 2005 JUNE ...
Страница 2: ......
Страница 54: ...R12C041200 ...