Optiva VODN4623IR, Руководство по установке

Страница: 9 / 36

IR Speed Dome Installation Manual
8
Chapter 1 Installation
Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
Note:
The adapter should be AC 24V/3A.
1.1 Installation and Cabling
1.1.1 Installing the Speed Dome
Steps:
1. Install the mount for the speed dome. Please refer to the chapter 2, 3, 4 and 5 for details about
the installing steps.
Notes:
For cement wall mounting, you need to use the expansion screw to fix the mount. The
mounting hole of the expansion pipe on the wall should align with the mounting hole on the
mount.
For wooden wall mounting, you can just use the self-tapping screw to fix the bracket.
2.
Install the speed dome to the mount. The wall mount is taken as an example below.
1) Wrap the thread compound to the thread of the mounting adapter. The mounting adapter
is shown in Figure 1-1.
Figure 1-1 Mounting Adapter
2) Rotate the mounting adapter to the wall mount. Secure the mounting adapter to the wall
mount tightly with lock screw as shown in Figure 1-2.
Lock Screw
Hook for
Safety Rope
Thread