User Manual – ePX 200
OptiPro Systems, LLC.
Page 21 of 60
Last Modified: 7/30/2014
Figure 5-14: Containment Drain Hoses
The Z-axis bellows screens are one-sided. The eight plastic pieces holding the top and
bottom bellows on (Figure 5-17) can be carefully pried open to pull the bellows screens out.
Take note of the side that faces into the containment and be sure to replace it in the same
orientation. The side facing out (facing the z-column) is the side with the ribs.
The door cylinders and rails can jam or seize if they are not cleaned regularly. They are
made of non-corrosive materials but are still moving mechanical components. Clean any
slurry off of these components with warm water and paper towels.
Figure 5-15: Upper Door Cylinder
Quick-
disconnect
hose fitting
