13
GETTING STARTED
Note
: GlobeSurfer®II is configured to synchronise the time automatically using the Network Time
Protocol (NTP) and will do so as soon as it connects to the Internet.
See the On-line help if you want to know about more ‘Date and time’ settings.
Configure your computers
Using Ethernet LAN
Once GlobeSurfer®II is configured as above, it is ready to be used. If you are only using the Ethernet
LAN connection with GlobeSurfer®II, no further configuration is needed. Simply open a new browser
window and use your computer to ‘surf’ the Internet with GlobeSurfer®II.
If you want to use the wireless connection (WLAN), additional settings are required on each compu-
ter that is connected to GlobeSurfer®II via the WLAN.
WLAN connection
Your computer must have a WLAN adapter that supports IEEE 802.11 b/g to set up a wireless connec-
tion. If encryption is used, make sure that each computer uses the same type of encryption as config-
ured in the ‘Quick Setup Wizard’.
For other operating systems, or if your specific WLAN adapter uses any other connection alternatives,
refer to the documentation from the WLAN adapter manufacturer.
Use the following instructions to connect your computer to GlobeSurfer®II if you are using
Windows® XP.
Z06.138_GSII_Man_E.indd 13
22-09-2006 17:07:02
