8
OPERATION
LISTENING SAFELY
To protect your hearing, follow these
guidelines when you use headphones.
• Since a pop sounds each time you
turn the headphones on and off,
always turn on the headphone
receiver before putting the head-
phones on your head and always
remove the headphones from
your head before you turn them
off.
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
USING THE SYSTEM
1. Turn on your audio source and
adjust its volume control to the
minimum position.
2. Set the transmitter’s
POWER
switch to
ON
.
Caution: The transmitter’s sur-
face heats slightly during opera-
tion. Do not touch the transmitter’s
surface while it is on.
3. Set the headphone receiver’s
ON/
OFF
switch to
ON
.
Illust.
Illust.
33-1143.fm Page 8 Tuesday, August 10, 1999 10:09 AM
