INSTRUCTION MANUAL
PHM-902 Version 1.0
1/1
PHM-902
WARNING:
⋅
Installation by qualified personnel only.
⋅
Avoid exposing the equipment to extreme
temperatures, humidity, mechanical vibration and dust
for long periods of time.
⋅
There are no user-adjustable parts inside the unit,
please do not open or make any adjustments.
⋅
Do not use benzene, alcohol, and other chemicals in
cleaning the unit.
MICROPHONE
SPECIFICATIONS
Place the microphone on a flat unobstructed surface.
Typical placement of the microphone is at arm’s length from the user. The front should be
facing the user. Ideally the sound source should be 60º above the plane of the mounting
surface.
Place one microphone in front of each person, or one between every two people.
Model
PHM-902
Element
Electret (condenser)
Polar Patter
Semi-cardioid
(cardioid above the mounting surface)
Frequency Response
50 ~ 18.000 Hz
Sensitivity
-68 dB
±
3 dB a 1 kHz
Impedance
250
Ω
±
30 % (balanced)
Operating voltage
9 V ~ 52 V DC (phantom power)
1,5 V UM3/AA (battery)
Consumption
< 2 mA
Signal to Noise Ratio
> 65 dB
Max. Input SPL
130 dB (1 kHz a 1 % THD)
Weigth
141 g
Dimensions (mm)
83,7 (length) x 68,7 (width) x 17 (height)
Finish
Base: zinc die-cast
Windscreen: iron
Input Jack: nickel
Colour
Black
Accessories
Power module and Ø 3 mm x 7 m cable with XLR
female plug at both ends
INSTALLATION GUIDE
