10
OPERATION
LISTENING TO THE
RADIO
1. Repeatedly press
TUNER ON/BAND
until the desired band (
AM
,
FM1
,
FM2
, or
FM3
) appears.
2. Rotate
VOL
to a comfortable listen-
ing level.
3. Use one of these methods to tune
to the desired station. The display
shows the tuned frequency.
Manual Tuning: Repeatedly press
or
–
to tune up or down
the selected band. To tune the band
more quickly, hold down
or
–
.
Automatic Tuning: Hold down
or
–
for about two sec-
onds, then quickly release it. The
CD player tunes up or down the
selected band, stopping at the next
station with a strong signal.
Memory Tuning: Press one of the
five memory buttons (
P1
through
P5
)
to directly select a preset sta-
tion. You can set up to 20 presets
(see “Storing a Radio Station in
Memory” on Page 11).
Notes:
• The CD player has a built-in AM
antenna. For the best AM recep-
tion, rotate the CD player.
• The supplied Y-cable or an
optional earphones’ or head-
phones’ cord serves as an FM
antenna. For the best FM recep-
tion, fully uncoil the cord.
• When listening to an FM station
broadcasting in stereo, press
STEREO/MONO
.
ST
appears. If
reception is poor or noisy, press
STEREO/MONO
again.
MONO
appears. The sound is not in ste-
reo, but reception should
improve.
4. Press
TUNER OFF
to turn off the
radio.
VOL
42-5098.fm Page 10 Wednesday, January 19, 2000 4:03 PM