8
Follow these steps to power the Micro-40
from standard AC power.
1. Set the AC adapter's voltage switch to 3V.
2. Insert the 3.4 mm outer diameter/1.3 mm
inner diameter barrel plug into the AC
adapter's cord so it reads TIP+.
3. Insert the adapter’s barrel plug into
DC 3V
on the recorder.
Note: Inserting the barrel plug into the
Micro-40's DC 3V jack disconnects the
internal batteries.
4. Plug the adapter’s other end into a stan-
dard AC outlet.
Using Vehicle Battery Power
You can power the Micro-40 from a vehicle's
battery using a DC adapter (not supplied),
such as Cat. No. 273-1810.
Rad
ioSn
ack
M
IC
D
C
3
V
14-1168.fm Page 8 Thursday, January 20, 2000 2:05 PM
