12
METAL STAND FAN WT-2640
Sleek & modern high-velocity fan provides more powerful
wind than ordinary plastic fans. Draws air off the floor and cir
-
culate through the entire room keeping room cool and breezy.
Put near the windows and it helps exhaust hot indoor stuffy air
and pulls in fresh outdoor air.
● Energy-saving, high velocity motor for maximum air circu
-
lation
● Tilt-adjustment for flexible use
● Triple speed selection
● Precision fan blades for powerful wind but low-noise
● Chrome-stand, solid construction with thermal-protection to
prevent motor overheat.
OPERATING INSTRUCTIONS:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds: 0(off) and speeds
I, II, ,III is Slow, Middle, Fast.
c) Tilting angles-By pushing the tilt-guard, you can adjust the
fan to any elevation preferred.
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard. If damaged after pro-long use,
get it repaired by any electrical repairman.
f)
To clean:
Disconnect the power cord from the mains. Re
-
move the guard and the blades carefully. Do not drop the
blades! First use soft cloth with light soap to clean off oil
stains. Then wipe and polish with dry cloth. Never use pol
-
ish or any corrosive liquid that will damage the paint, metal
or plastic! Put back the blades and lock the guard securely
before use.
NO exchange will be entertained if the above instructions are
not followed. Always Test the product first before purchase.
SAFETY PRECAUTIONS
1) This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental capabili
-
ties, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2) Children should be supervised to ensure that they do not play
with the appliance.
3) Have any repairs carried out solely by a qualified electrician.
Never try to repair the appliance yourself
ANTIQUE DESK
(TABLE)
FAN WT-2630
ASSEMBLY
Remove the wing screw from the motor pain.
Fit the rear cage onto the motor pain. Make sure that the 2 holes
on the motor match the 2 holes on the rear cage. Fit the wing
screw and screw it on firmly.
Put the blade on the motor pain and carefully tighten the screw.
Fit the front cage onto the rear cage and fix them together using
the metal clips. Tighten the small screw.
OPERATING INSTRUCTIONS
The fan has 3 speed settings:
0 = Device off
I = Low speed
II = Medium speed
III = High Speed
The fan can operate in oscillating or stationary mode. Press the
oscillation button to activate the oscillating mode.
CLEANING AND CARE
Always switch the fan off and unplug it before cleaning.
Clean the parts using a damp cloth and mild detergent to clean
the surface of the device. Never use abrasive cleaning agents.
Under no circumstances use gasoline or solvent to clean.
Do not immerse in any form of liquid.
If the ventilator is no longer required, store it in a cool, dry
place.
ECOLOGY – ENVIRONMENTAL PROTECTION
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such waste.
Obsolete or broken-down electrical device
should be
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy
-
clable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
Weight: WT-2630: 3.00kg
℮
Weight: WT-2640: 6.30kg
℮
MODEL
POWER
VOLTAGE
FREQUENCY
NOISE LEVEL
WT-2630
35 W
220-240 V~
50 Hz
55.7 dB(A)
WT-2640
50 W
220-240 V~
50 Hz
65.3 dB(A)
Содержание WT-2630
Страница 4: ...4...