Optimum ST-1415, Инструкция по эксплуатации, Страница: 11 / 12

11
INSTRUCTION MANUAL
Hot Plate ST-1415
UK
4. When ready indicator is on, baking 6-8 minutes. After
cooking products,open the appliance and remove products
with a pair of plastic tongs.Sandwich maker can also be
stopped at any time by unplugging the power cord out of
the outlet.
CAUTION:
1. If too much food is inserted into the appliance
and the Sandwich Maker cannot be closed.
Never close it with undue force as this would do
damage to the handle.
2. Never using sharp fork or knife to remove the
food as this would damage the non-stick coat-
ing of cooking surface. Use heat-resistant wood
or plastic utensils only.
3. Before unclipping the heating plate make sure
the appliance has been disconnect from power
supply and heating plate is cool enough.
4.
Warning:
Never touch the heating plate dur-
ing operation. As the heating plates are very
hot scalding may occur if touched the heating
plates.
CLEANING AND MAINTENANCE
Clean the Sandwich Maker every time after use.
Unplug the appliance from power supply and wait it
completely cool before cleaning
INSIDE: use a soft wet cloth to wipe the heating surfaces
and dry thoroughly.
OUTSIDE: Wipe with a soft cloth which has been rinsed
almost dry in warm soapy water, and dry with a soft cloth.
1.
Note: Never use the abrasive cleaner or
rough scouring pad to wipe the heating plates
otherwise the non-stick coating would be easily
damaged.
2. After cleaning, close and lock the appliance by snapping the
handle fastener into the handle.
3. Store the appliance in a cool dry place out of the reach of
children. You may rest the appliance vertically to minimize
the storage space.
4. If any problem has been found, please contact the authorized
service center for help.
TECHNICAL PARAMETERS:
Power: 700Watt
Voltage: 220-240V~
Frequency: 50/60Hz
ECOLOGY – ENVIRONMENTAL PROTECTION
The “crossed-out trash bin” symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste and
should not be disposed of into containers for such
waste.
Obsolete or broken-down electrical device should be
delivered to special designated collection points, organized by
local public administration, whose purpose is to collect recy
-
clable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the
reclaiming of materials which the product is made of.
Weight: ST-1415 – 1.12 kg
℮
Heat plate