12
➅
Pull the plug out of the power socket after working.
ATTENTION:
• The accessories continuous working time sho
-
uld less than 1 minute. After working 1 minute,
they need to rest for 1 minute.
• Regarding 1 minute at work and 1 minute at
rest as a cycle. After continuously working 5
cycles, it must rest 30 minutes for motor cooling.
• In order to ensure the sealing effect of blen
-
ding blade, please do not allow the blending
blade to work without immersing into liquids.
CLEANING AND MAINTENANCE
1) You should unplug the power cord plug before cleaning.
2) Do not touch the sharp blade.
3) Please use dry dishcloth to wipe the product body. And it
is strictly prohibited to let the main unit rinse with water or
immerse to the water.
4) Please do not use metal brush, nylon brush, household cleanser,
diluent and other similar cleaning supplies to clean this product,
as they may damage the product surface structure.
5) Please use soft dry cloth to wipe the dirt on the power cord.
6) The cleaning requirements of each functional accessories.
SPECIFICATION:
Power Supply: 220-240 V~, 50/60 Hz
Power: 800 W; Level of noise: 80 dB
ECOLOGY - ENVIRONMENT PROTECTION
The „crossed-out wheeled bin” symbol placed on
electrical equipment or packaging indicates that
the device may not be treated as general household
waste and should not be disposed of in dedicated containers.
Unnecessary or used electrical equipment should be delivered
to specially designated collection points, organized by the local
public administration, intended for the delivery of electrical
equipment subject to disposal.
In this way, each household contributes to the reduction of
possible negative effects affecting the natural environment and
allows you to recover the materials that make up the product.
Weight: 0.78kg
℮
PHENOMENON
REASONS
HANDLING METHOD
The motor running,
but the blade doesn’t work
1) The functional accessories does not lock well
with the main unit
1) Lock them well
2) The blade is entangled by food material
and stuck
2) Pull the plug out, and then take out the food
material and cut them into small pieces
The product suddenly stops
working in the processing
of using
1) Using for a too long time, and the motor
overheating and damaged
1) Working time should strictly according to the
instruction manual
2) The plugs loose or power failure
2) Excluding this problem after checking
Abnormal vibration
or excessive noise
1) The functional accessories does not lock well
with the main unit
1) Lock them well
2) Putting into too much food material
2) Pull the plug out, and then take out the excess
food material, and choose low speed to work
The product doesn’t work after
plugging in the power cord
and pressing the on-off key
1) Power failure or power socket in the closed
state or plug loose
1) Excluding this problem after checking
2) Electronic board damage or motor damage
2) Have a repair service
COMMON PROBLEM ANALYSIS
Remark:
If still unable to troubleshooting after the above phenomenon analysis, please contact our maintenance personal or the dealer. It is
forbidden to disassembly by non-professional personnel
