OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.3.2 dated 2015-01-22
Page 12
Original operating instructions
DG20
US
1.10
Personal protective equipment for special works
Protect your face and your eyes: wear a safety helmet with a face guard for all work, espe-
cially during a task where your face and eyes are exposed to hazards.
Wear safety shoes when carrying the drill bit grinder.
1.11
Safety during operation
In the description of work with and on the drill bit grinder, we need to highlight the dangers spe-
cific to that work.
WARNING!
Before activating the drill bit grinder, double check that this
will not endanger other persons,
cause damage to equipment.
WARNING!
Fire- or explosion hazard by flying sparks.
Do not operate the drill bit grinder nearby combustible or explosive material.
Avoid unsafe working practice:
Make sure that, your work does not endanger anyone.
Use safety glasses.
The instructions of this manual must be observed strictly during assembly, operation, main-
tenance and repair.
Do not work on the drill bit grinder if your concentration is reduced, for example, because
you are taking medication.
Observe the regulations for the prevention of accidents issued by OSHA or other inspec-
tion authorities.
Inform the inspector of any danger or failure.
INFORMATION
In the description of execution of work with and on the drill bit grinder, we highlight the dangers
specific to that work.
1.12
Electrical system
"Maintenance“ on page 24
Have the machine and / or the electrical equipment checked / maintained regularly i.e. at least
every six months.
Eliminate immediately all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components, to disconnect the power in
case of an emergency.
Disconnect the drill bit grinder immediately from the electrical power if there is a malfunction in
the power supply!
