OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 2.0.2 2014-11-04
Page 29
Original operating instructions
B17Pro | B23Pro | B26Pro | B33Pro
GB
B33Pro, B33Pro Vario
Img.3-12:
Fixing of foot B33Pro
3.6
First commissioning
ATTENTION!
Before commissioning the machine check all screws, fixtures resp. safety devices and
tighten up the screws if necessary!
WARNING!
Risk by using improper workpiece clamping materials or by operating the machine with
inadmissible speed.
Only use the clamping materials (e.g. drill chuck) which had been delivered togetherwith
the machine or as optional equipment offered by OPTIMUM.
Use the working clamping materials only in the provided admissible speed range.
Workpiece clamping materials must only be modified according to the recommendations
of OPTIMUM or of the clamping material manufacturer.
WARNING!
When first commissioning the drilling machine by inexperienced staff you endanger
people, the machine and the equipment.
We do not take any liability for damages caused by incorrectly performed
commissioning.
Power supply
Connect the electrical supply cable.
Check the fusing (fuse) of your electrical supply according to the technical data.
