Optimum MAMMA MIA, Руководство пользователя, Страница: 22 / 26

20
// O P T I M U M M A M M A M I A
T R O U B L E S H O OT I N G
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not work.
The appliance is not plugged
in. Plug the power cord Into a
wall socket.
After pressing the Power
Button, the appliance chimes/
rings shaft does not work.
Some part of the appliance is .
assembled incorrectly.
Ensure the assembly
instructions In the 'Parts &
Accessories' section have
been followed correctly.
The safety switch is triggered
and the appliance has
suddenly stopped or suddenly
restarts.
The front panel knob is loose.
Excessive ingredients in the
pasta maker.
Make sure the front panel is
securely assembled.
Remove the dough and
start a new batch using
recommended measurements.
During processing, the
appliance stops working when
opening the lid.
For safety reasons, the
appliance always stops
working when the lid is
opened during processing. If you need to resume the
previous operation, close the
lid properly and press the
Start/Pause Button.
E1 displays on the screen The motor is blocked. Contact customer service.
Pasta dough is too sticky.
Cooking environment might
be more humid than the
recipe assumes or. too much
liquid was used.
First, try adding 1 tbsp flour
at a time to absorb extra
moisture.
Pasta dough is too dry.
Cooking environment might
be less humid than the recipe
assumes or not enough
liquid was used.
Add 1 tsp. of liquid at a time
until the dough looks like
coarse, wet sand.
Pasta dough is sticking to side
of mixing chamber. it is common for flour to stick
and then gradually mix in.
Dough could be too wet.
Dough will gradually mix into a
larger dough ball. If not, stop
the appliance and use the
spatula to remove flour from
the Mixing Chamber wall.
The cycle stopped and there
is remaining dough. The dough is too wet and the
dough balled together. Press the Forward Button to
allow another cycle to run.