Optimum LED MWG 6-100 Скачать руководство пользователя страница 6

Operation

Version 1.0.2  dated 2018-10-15

Page 6

Translation of the original instructions

LED MWG 6-100

LED MWG 6-600

LED MWG 6-720

GB

LED6-1

00_L

ED6-6

00_LE

D6-72

0_GB

.f

m

OPTIMUM

M A S C H I N E N   -   G E R M A N Y

®

5

Operation

Switch-on and switch-off

INFORMATION

The luminaire is equipped with a switch of its own. The luminaire will switch on when the switch
is turned on.

6

Maintenance

Replacing the lamp.

WARNING!

Danger of death due to electric shock. 

Disconnect the luminaire from the power supply.

INFORMATION

The luminaire is maintenance-free. A lamp replacement is not required. If nevertheless a lamp
should break down, the complete luminaire must be replaced.

ATTENTION!

Material damage caused by using wrong cleaning agents. Damage to the luminaire.

Make sure the cleaning agent is compatible with the surface.

7

Appendix

7.1

Liability claims/warranty

Besides the legal liability claims for defects of the customer towards the seller, the manufac-
turer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not
grant any further warranties unless they are listed below or were promised as part of a single
contractual provision.

Liability or warranty claims are processed at OPTIMUM GmbH's discretion either 
directly or through one of its dealers. 
Any defective products or components of such products will either be repaired or 
replaced by components which are free from defects. Title to replaced products or 
components is transferred to OPTIMUM Maschinen Germany GmbH.

The automatically generated original proof of purchase which shows the date of purchase, 
the type of machine and the serial number, if applicable, is the precondition in order to 
assert liability or warranty claims. If the original proof of purchase is not presented, we are 
not able to perform any services. 

Defects resulting from the following circumstances are excluded from liability and warranty 
claims:
- Using the product beyond the technical options and proper use, in particular due to over-

straining of the machine.

- Any defects arising by one's own fault due to faulty operations or if the operating manual

Содержание LED MWG 6-100









Отзывы: