8
MEAT GRINDER FUNCTION
(*OPTIONAL ATTACHMENT - Available for purchase via our website)
HOW TO ASSEMBLE AND USE THE MEAT GRINDER
1) To install the meat grinder accessories, first remove the attachment outlet cover from the machine
head (PG2) by loosening the screw turning anti-clockwise and removing the cap. Now align the
meat grinder housing M3 into the outlet port and tighten the screw clockwise until the attachment
is firmly in place, place the auger M4 into the housing and push until secure, then put the grinder
blade M6 on the head of the auger, followed by your selected grinder plate M7, ensuring it aligns in
the grooves and sits securely. Finally, tighten the mincing cap M5 onto the grinder housing.
2) Align the discharge port of tray M1 with the feed port of meat grinder M3 and install it in place (PG4)
3) Place a container at the outlet of the meat grinder. Cut the meat into small strips or pieces able to
fit through the feed tube. The width should not exceed the feed inlet of the tray M2. (Use cold or
partially frozen meat for best results)
4) Plug into the power socket, then press the power button to turn on, set the speed to 3 and press
play/pause button, put the meat on the tray M1 and feed it through the feeding port. Please use
the pusher M1 to slowly press the meat into the feeding port of the meat grinder. Do not put your
fingers into the meat grinder M3.
5) Once finished, stop the machine function and unplug from the power supply.
Note: When using the accessories, always keep the bowl in place to avoid risk of injury.
M1
Pusher
M2
Tray
M3
Meat Grinder Housing
M4
Auger
M5
Mincing Cap
M6
Grinder Blade
M7
Grinder Plate
