Optimum 700 ADVANCED, Руководство пользователя

Страница: 7 / 11

10 11
TIPS AND PRECAUTIONS FOR USE
REMOVE HARD SEEDS BEFORE JUICING FROM FRUITS LIKE:
PERSIMMONS, PEACHES, PLUMS, ETC.
HARD ITEMS (KUDZU VINE, SUGARCANE ETC.) ARE NOT SUITABLE
FOR JUICING.
JUICER CAN BE USED TO MASH GARLIC AND PEPPERS WITH MOISTURE.
NOT SUITABLE FOR GRINDING DRY GRAINS.
WHEN JUICING HARD FRUITS OR VEGETABLES, LIKE CARROTS, THEY
MAY CAUSE LOUD NOISES, THIS DOES NOT INDICATE DAMAGE TO
THE MACHINE.
BE AWARE THAT JUICE MAY SPILL OUT WHEN JUICING FRUITS AND
VEGETABLE LIKE GRAPES AND TOMATOES.
USING FROZEN FRUITS AND VEGETABLES MAY INFLUENCE THE FLAVOUR
OF JUICE.
FREQUENTLY JUICING PROCESSED AND HARD FOOD STUFFS (ICE, FRUIT
SEEDS, ETC.) MAY DAMAGE THE STRAINERS. PLEASE USE WITH CARE.
THE CONTINUOUS WORKING TIME SHOULD BE NO MORE THAN
30-45 MINUTES.
DRINK JUICES AS SOON AS POSSIBLE AFTER JUICING, IF YOU WISH
TO STORE JUICE PLACE IT IN A SEALED GLASS CONTAINER IN
THE REFRIGERATOR.
JUICING TOO MUCH FOOD OR JUICING HARD FOOD STUFFS MAY MAKE IT
DIFFICULT TO REMOVE THE HOPPER FROM THE JUICING BOWL.
IMPORTANT NOTE:
You will need to disassemble and clean your Optimum 700 Advanced Cold-Press Juicer
immediately after using it, every time you use it. If you allow the juicing residue inside it
to dry out, you will find it hard to disassemble and clean the juicer later on.
CLEANING AND MAINTAINING YOUR JUICER
Turn the drum lid counter clockwise
to open.
1
Switch off and unplug the juicer.
Never try to disassemble the
machine while the power cord is
plugged in.
Open the drum lid. Turn the lid
anticlockwise to open it, until the
‘unlock symbol’ and the triangle lines
up. If the lid is stuck, please refer to the
troubleshooting section.
Separate out and clean the juicing
components. Remove the spinning
brush holder, strainer and juicing screw
from the juicing bowl. Clean them in
hot, soapy water using the special juicer
brush provided.
Clean the juice bowl. Remove the
compression silicon from the slot (DO
NOT detach), then rinse the bowl in water.
Ensure the pulp outlet is rinsed clean,
then soak the bowl in a sink of warm
water with vinegar and/or baking soda
to remove any lingering residue.
Remove the base. Separate the juicing
bowl from the juicer base. Wipe down
the base with a damp cloth if required.
2
3
4
5
TIP:
Ensure all components are completely dry before you put them away.