Optimum 3338135, Руководство по эксплуатации

Страница: 12 / 71

Version 1.0.4 - 2020-07-28 12 Translation of original instruction
MH22V │ MH22VD EN
MH
22
V_MH2
2
VD_G
B_1.
fm
1.6.7 Additional requirements regarding qualification
The following additional requirements apply for work on electrical components or equipment:

They must only be performed by a qualified electrician or person working under the instruc-
tions and supervision of a qualified electrician.
Before starting work on electrical parts or operating agents, the following actions must be taken
in the order given:

disconnect all poles,

secure against restarting,

check that there is no voltage.
1.7 User positions
The user position is in front of the milling machine.
1.8 Safety measures during operation
CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Depending on the materials to be machined and the agents used, dusts and mists can
arise that are detrimental to health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g. alu-
minium, magnesium) or using combustible agents (e.g. spirit) to avert a health hazard.
1.9 Safety devices
The milling machine must only be operated with fully functional safety devices.
Stop the milling machine immediately if there is a failure on the safety device or becomes inef-
fective.
This is your responsibility!
If a safety device has been activated or has failed, the milling machine must only be used if you

have eliminated the cause of the fault and

have verified that there is no danger to personnel or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other persons working with the milling machine. The possible
consequences include:

injuries due to components or workpieces flying off at high speed,

contact with rotating parts and

fatal electrocution.
WARNING!
Although the isolating safety devices provided and delivered with the machine are designed to
reduce the risks of workpieces being ejected or parts of tools or workpieces breaking off, they
cannot eliminate these risks completely. Always work carefully and observe the limits of the
machining process.