Safety
Version 1.1.2 - 2022-02-24
57
Translation of original instruction
S 131 GH
EN
S131
GH_GB
_1.
fm
1.13.3 Mechanical maintenance work
Remove or install protection safety devices before starting or after completing any maintenance
work; this include:
covers,
safety instructions and warning signs,
grounding cables.
If you remove protection or safety devices, refit them immediately after completing the work.
Check if they are working properly!
1.14
Accident report
Inform your supervisors and Optimum Maschinen Germany GmbH immediately in the event of
accidents, possible sources of danger and any actions which almost led to an accident (near
misses).
There are many possible causes for "near misses".
The sooner they are notified, the quicker the causes can be eliminated.
INFORMATION
We provide information about the dangers of working with and on the metal band saw in these
work descriptions.
1.15
Electronics
Have the machine and/or the electrical equipment checked regularly, at least every six months.
Immediately eliminate all defects such as loose connections, defective wires, etc.
A second person must be present during work on live components to disconnect the power in
the event of an emergency.
Disconnect the metal band saw immediately if there is a malfunction in the power supply !