Safety
Version 1.0.2 - 2020-07-06
14
Translation of original instruction
DH 40CT | DH 40CTP
EN
D
H
4
0
CT_DH40CTP_G
B_1
.f
m
1.10
Safety check
Check the drilling milling machine at least once per shift. Inform the person responsible immedi-
ately of any damage, defects or changes in the operating function.
Check all safety devices
at the beginning of each shift (with the machine stopped),
once a week (with the machine in operation) and
after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the drilling milling
machine
are legible (clean them, if necessary)
are complete.
INFORMATION
Organise the checks according to the following table;
1.11
Personal protective equipment
For some works you need personnel protective equipment as protective equipment. These are
Safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel toe caps,
ear protection.
hairnet.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness.
General check
Equipment
Check
OK
Guards
Mounted, firmly bolted and not damaged
Drill chuck guard
Signs,
Markers
Installed and legible
Date:
Checked by (signature):
Functional check
Equipment
Check
OK
Emergency-stop
pushbutton
After actuating an emergency stop push button the drilling
milling machine must be switched off.
Spindle guard
The drilling milling machine can only be switched on if the
guard is closed.
Date:
Checked by (signature):
