Optimas OP-680 Скачать руководство пользователя страница 74

Страница: 74 / 76

APPENDIX

Appendix 1: PC communication mode

The Cash Register communicated by USB or and PC directly. Please make the lock located at L

place when the Cash Register communicated with PC, as other positions can not communicated

with PC.

The Cash Register can connect with USB scanner ( Position PRG and Position REG)

Appendix 2: Error codes and Messages

Error code

Reason/Solution

E 1

Wrong key press. Press [CLEAR] key to cancel.

E 2

The amount entered is too large. Press the [CLEAR] key to cancel and

re-enter the amount.

E 3

The transaction is not finished. Press [CASH] to finalize.

E 4

Password is required. Press the [CLEAR] key and enter password.

E 5

Clerk ID has not been entered. Press the [CLEAR] key to cancel and enter a

clerk ID.

E 6

System error. Please press the [CLEAR] key to clear the error.

E 7

The tender amount has not been entered. Press the [CLEAR] key and then

enter the tendered amount.

E 8

[ON/OFF] key is pressed and the Receipt [ON/OFF] is inactive. See the

information of Config Options 0108.

E 9

Shown when you turn the control key to other position than P while you are

programming a tax table. Turn back to P and finish the programming.

E c

The maximum number of items for the transaction has been reached. Please

finalize the sale.

E r

The report memory is full;

please print the “Z” report (including daily report and

periodical report).

EP2

The printer is short of paper. Replace the paper roll.

General error. Please press the [CLEAR] key to correct.

E B

Battery low, change your batteries.

BAT LO

Battery low change your batteries immediately.

Содержание OP-680













































































Результаты поиска

Содержание OP-680

Отзывы:

Похожие инструкции для OP-680

Бренды по названию

Популярные бренды

Optimas OP-680, Руководство пользователя

Результаты поиска

Содержание OP-680

Отзывы:

Похожие инструкции для OP-680

Бренды по названию

Популярные бренды