Optimal P 650, Руководство пользователя

Страница: 15 / 44

- 13 -
When changing bigger for smaller blades:
Slide guide pipe in until pin holes do agree.
When changing smaller for bigger blades:
Slide guide pipe out until pin holes do agree.
Then secure position with retention pin and
locking pin.
Re-Assembling Scoop
Put blades into position; fasten them to piston rods
and sliding arms respectively.
Make sure that blades close properly. If necessary,
adjust as shown on page 15.
Make sure that all bolts and screws are tightened
properly !