Instructions for Use and Maintenance 151-191 (1310)
trejonindustries.se
19
Breddningsvingen
monteras på
insidan av
maskinen
The ejector tube has two mounting holes. These will enable you to regulate the distance the
ejected snow is thrown.
3.5 Operating the machine
Warning!
Operator must have a good view over the working area and the area where the ejected
snow lands. Heavy items in the snow, such as stones etc., can be propelled much
further than the snow itself.
Before leaving tractors cabin ensure that all moving parts have come to a complete
stop.
Caution!
The shear bolt is No guarantee for machine not being damaged at impact with heavy,
solid objects.
To avoid damages on machine, lift snow blower before going backwards with the
equipment.
A doubled driving speed, make the stress at the equipment four times higher. Damages
on snow blower caused by impact with heavy, solid objects isn’t covered by the
warranty.
Keep the specified PTO between 540 and
1000 rpm’s all through the run. PTO speed is
adapted in this range after the working conditions. Try to keep the line of the PTO shaft as
straight as possible when running the equipment. A standard PTO shaft must not operate at
angles exceeding 35 degrees.
Optional mounting holes for the ejector
tube.
