3
Chapter 2
OPR200-05S / OPR200-05R
2.1 OPR200-05S / OPR200-05R Description:
The Models OPR200-05S and OPR200-05R are 1U rack mountable power supplies designed to
operate in single and redundant power configurations respectively. OPR200-05S has one built-in
universal AC to 5V DC power supply, and OPR200-05R has two built-in universal AC to 5V DC
power supplies with two IEC AC plugs for complete redundancy. OPR200-05S provides up to
200W of power, and OPR200-05R provides up to 400W of redundant power
*
to the system that
each is attached. Each model has its own AC-INLET (one for OPR200-05S and two for
OPR200-05R for redundancy), ON/OFF switches, and power LEDs (one for OPR200-05S and
two for OPR200-05R). Both models have two built-in alarm circuits with red LEDs for low DC
power monitoring and for remote power management. In addition, models OPR200-05S and
OPR200-05R have Logic Interface for power supply alarm circuit.
2.2 Specifications:
Electrical
Output Voltage
+5V DC
Output Ripple
Typical 50 mV
Output Current
36A Typical
Output Power
400W for OPR200-05R
*
200W for OPR200-05S
Input Voltage
Universal 90VAC to 264VAC input (2 AC inlet plugs in
OPR200-05R for complete redundancy)
Input Frequency
47Hz to 63Hz
Input Current
5 Amps max
Remote Management Interface
RS485
Note*: 400W is intended only for redundancy; it is not recommended to power a total load
of 400W with the Model OPR200-05R
Typical Safety Ratings for Internal Modules:
Designed in full compliance with
UL60950
CSA 22.2 No. 234
EN60950
EMI
EN55022 “Class B”
EMS EN61000-4-2,-3,-4,-5,-6,-8,-11
Harmonics
EN61000-3-2 Class D
