Optima ESGO 4000, Инструкция по установке, Страница: 9 / 21

9
2.2 Cabinet Features
IP 55.
Material:
 1.5 mm thick sheet metal (electrogalvanized, RAL 7035 electrostatically(epoxy) powder coated
and furnaced)
 Dimensions :
76,5 cm x 52,5 cm x 37 cm (Cabinet may be manufactured in different dimensions according
to requirements)
Picture 3. Cabinet Views
2.3 Electrical and Electronics Components
Control electronics utilized in electromechanical sliding gate operator is PLC controlled.
Open/close function can be achieved by every kind of card readers, biometric readers like fingerprint
or hand shape, radio control, on/off switches or key switches etc. Besides, safety accessories like
inductive loop detectors, photocells, flashing lights or red/green lights can be integrated to control
electronics very easily. Power requirement of the electromechanical sliding gate operator is 220 VAC
50~60 Hz.
As you see below the drawing, we use a sensor for reduction the speed of sliding gate operator. By
means of this sensor, when the gate is closed or opened , gate will be damp at end point. And so the
operator will be run much high performance.
ADJUSTABLE
METAL PART
FOR SENSOR
www . optima-engineering . com