Remove motor loosening the fixation screws. Install the replacement motor following the process in reverse
order, making sure that the motor and the turbine fit perfectly, the turbine screw must fit in with the flat part of
the motor axle
Fuse and PCB (plate) replacement:
Before the replacement, advise people that there is work in
progress,
Disconnect main supply, make sure that the unit is without
tension and that the fans are stationary.
Fuse replacement:
Open the service door and remove
the fuse from the fuse holder by hand or pulling with
screwdriver and replace.
Plate replacement:
Open the service door and
unplug the visible cables from the plate and the
condenser.
