6.0 backlight display
LCD backlight can be set to remain open until closed or automatically
turned off (i.e., when using scales or press the start button) three
modes
See details in section 11.2 how to setup
7.0 Auto power off function
Automatic shutdown feature can be turned off by the user to set this
feature or allow shutdown within a certain time frame for the scale,
details see section 11.1.
8.0
Operating Instructions
8.1
Power on
Press
to power on
the indicator will self-test, and connect to
the platform with Bluetooth, be sure the platform within the
range 5 meter and battery is ok if
“bt-c” is shown.
The platform’s led light will be on then, and the weight will
be show on the LCD of indicator.
press
again will power off the indicator, and the platform
will power off too.
The scale can be set as desired by the user to control the weighing
8.2
Zero function
If the current weight on pan is less than 1 % of the max. capacity,
press to zero the scale.
8.3
Tare function
Press
to tare the weight if the weight is less than max. capacity,
and the
will be show on the display.
8.4
select units
press
to select units
8.5
print/hold function
If communication output mode is set “pr” (refer to 11.4),
press
key
will send weight to the USB port. If hold mode is set “hod 3” (refer to
11.5), press
key will hold the reading or cancel the hold.
9.0
External calibration
It may need to be re-calibrated after use for some time, or the reading
is not correct.
⚫
In the normal weighing mode, the order press
+
+ + +
to external calibration.
Enter the need for
external calibration weights weight (unit
：
KG)
，
press
Increase value
，
to displacement.
⚫
⚫
Press
to confirm
Note: If you select a weight less than or greater than 10% of the
weighing
，
there will display the “
CALEr
” err
code. Press
external calibration.
to re
⚫
After passing external calibration, scale will return to weighing
mode
11.0 User parameter settings
operation. Press
to select, and press
to confirm.
11.1 auto power off function
⚫
Turn off the scale
press
and turn on the scale, then release the
，
displayed
“Pr
oFF”
，
press
to select “Pr oFF” or “Pr
on”
1.
Pr on
：
Enables the Auto Power Off function. The power will be
turned off after 2minutes if a key has not been pressed for 2
minutes and the scale is at zero. If there is any weight on the scale
or a key is pressed, the scale will continue to work.
2.
Pr oFF
：
Disables the Auto Power Off function. The scale will not
automatically turn off
.
