Keratron
™
Onda Installation and operating manual
OPTIKON 2000
Cod. 161401EN
9-9
2015-03-27
Rev.C
Figure 9-9: Selection of the DHCP mode
If Keratron
™
Onda has a
wireless
connection, it is necessary to enter the network
card you wish to use in the LAN card field. If DHCP has been configured for the
Remote Host Computer
, it is not possible to identify it using a static IP address. In
this case, the assignment can be done using the name that displays on the LAN
network. By selecting the box shown in Figure 9-10, it is possible to display a virtual
keyboard and enter the name on
touchscreen.
Figure 9-10: In DHCP it is possible to specify the computer name
used for the connection to Keratron
™
Onda
9.5.2
CONFIGURATION WITH STATIC ADDRESS
Keraton
™ Onda can be connected to a network using a static IP address following
The configuration fields (IP Address, Subnet Mask, Gateway
…) must be completed
using the
touchscreen
.
Содержание KERATRON ONDA
Страница 5: ......
Страница 76: ...Cod 161401EN 8 4 2015 03 27 Rev C THIS PAGE IS INTENTIONALLY BLANK...